About Us

Keith Willing

Founder and President of
Southern Air Concepts since 1998

Southern Air Concepts, Inc. was founded by Keith Willing in 1999 and is headquartered in Atlanta, GA.

We believe it is our duty to responsibly present products to the HVAC industry in a manner that solves the environmental conditioning needs of our customers while striving to equitably achieve the strategic goals of the manufacturers that we represent.

We provide HVAC solutions, satisfy environmental conditioning needs, and aim to equitably achieve manufacturers’ goals. Southern Air Concepts is a manufacturers’ representative agency serving the HVAC industry. We represent premier manufacturers in the HVAC Industry, offering a wide variety of products.

At Southern Air Concepts, we assist our customers with technical questions regarding application and installation of their HVAC equipment and provide professional sales and application expertise, engineering assistance, factory authorized start-up and educational development.

OUR TEAM

John Hicks

Sales Engineer

Renato Lemos

Sales Engineer

Tyler Rood

Sales Engineer

Luiz Silva

Sales & Marketing

Ron Norman

Sales Engineer (Carolinas)

BRANDS

SITEMAP:

BRANDS:

CALL US NOW:

6925 Gilleland Ln NW, suite 101 Atlanta,
GA 30360

+1 (770) 582-0067

mail@soairc.com

DOAS / High Outside Air Selection Request

External Static Pressure *

Outdoor Dry Bulb Deg F

Outdoor Wet Bulb deg F

Return Air Dry Bulb deg F

Return Air Wet Bulb deg F

Desired Leaving Air Dry Bulb deg F

Desired Leaving Air Wet Bulb deg F

Chilled Water Applications:

Entering Water Temperature deg F

Leaving Water Temp deg F

Misc Cooling Options

Compressor Sound BlanketsFive Year Compressor WarrantyLow Ambient Operation (Not Req'd with ECM Condenser Fans)

Gas Heating Options:

Split System Turndown

Misc Heating Options

Vertical Flue Discharge Kit for 5:1 Unit (less pipe)Dual furn vent extension kit for 10:1 Unit (less pipe)PVC Vertical Flue Discharge Kit for 5:1 Unit (less pipe)PVC Dual furn vent extension kit for 10:1 Unit (less pipe)Condensate NeutralizerCondensate Pump (field power req'd)Condensate heat tape (fleld power req'd)Five Year Heat Exchanger WarrantyTen Year Heat Exchanger Warranty

Factory Installed Options

Digital Phase Loss/Low Voltage MonitorBACNET ModuleContacts for Remote Start/Stop SwitchDDC Dirty Filter Pres SwitchAir Flow Monitoring Station (Supply SCFM)Air Flow Monitoring Station (Exhaust SCFM)Air Flow Monitoring Station (Outside Air SCFM)120v Convenience Outlet (field power required)200 deg F Firestat (shipped separate)

Field Installed Options

DDC Photoelectric Smoke DetectorWall mount DDC Monitor & Temp AdjustProgrammable ThermostatRemote Display/Control ModuleHandheld Display/Control Module w/CableExtra Set of Filters

Reznor® is a registered trademark of Nortek Global HVAC, LLC

Application Description:

Area Dimensions (feet):

GAS HEATERS: Platinum and Tungsten Smart-Heat heaters are as follows:(Note: adequate clearance must be directly above the heater)

Wall Mount NO Deflector:

Wall Mount WITH Deflector:

Ceiling Mount NO Deflector:

Ceiling Mount WITH Deflector:

TUNGSTEN ELECTRIC: Tungsten Smart-Heat Electric heaters are as follows:

(Note: adequate clearance must be directly above the heater)

PLATINUM ELECTRIC: Platinum Smart-Heat Electric heaters are as follows:

(Note: Minimum distance between heaters measured from edge of heater must be at least 20")

Will the heater be adequately covered (i.e. shielded from rain)?

YesNo

Have site plans and/or digital photos been provided?

YesNo

NOTE: in order to more accurately review your heating requirements and provide a valid recommendation, a dimensioned plan and elevation views are required. Please also provide digital photos of the area).If site plans not available, draw a sketch of the area showing all elevation views and open areas. Please include an appropriate scale. We will email you upon submission of this form.

The heater is to be mounted on the... *

If ceiling mounted what is the material type?

Are there any other ceiling fixtures?

YesNo

If so, describe ceiling fixtures (i.e. lighting, audio, sensors)

If wall mounted, what is the wall constructed of?

Are there any wall obstructions?

YesNo

If so, describe wall fixtures (i.e. lighting, audio, sensors)

Will the bracket be mounted directly on to the wall?

YesNo

(any additional mountings (i.e. angle mount bracket/pole) are the responsibility of the installer)

Does the site have existing gas piping?

YesNo

Is 110v (for 1 or 2 AMP) power available?

YesNo

Is a protective cover required ?

YesNo

(Cover may be required for environmental protection OR because of lower ceiling height)

Electric Applications

Ceiling Mount Options:

10" Short Bracket13" Long BracketTube SuspensionCeiling Recess

Wall Mount Options:

10" Short Bracket13" Long Bracket

(NOTE: 4000W & 6000W models are supplied with long mounting brackets to be used for both ceiling & wall mounting. Alternatively, short mounting brackets can be used for wall mounting of the 4000W & 6000W models to position the heater closer to the wall. Short mounting brackets must be purchased separately.)

Application Description:

Space Dimensions (feet)

Existing Space Conditioning

Existing Heat Source:

Existing Cooling:

YesNo

AtmosAir IAQ Sizing & Selection Form

"*" Indicates Required Fields

AHU or RTU System Tag

Square Footage (If Available)

For multiple systems email details to mail@soair.com

Magic Aire Selection Request

("*" Indicates Required Fields)

External Static Pressure

Piping Orientation

Left HandRight HandLH Cooling, RH HeatingRH Heating, LH Cooling

(Facing return with air hitting the back for your head)

Replacing Existing Equipment:

Outdoor Dry Bulb Deg F

Outdoor Wet Bulb deg F

Return Air Dry Bulb deg F

Return Air Wet Bulb deg F

Desired Leaving Air Dry Bulb deg F

Desired Leaving Air Wet Bulb deg F

Chilled Water Applications:

Entering Water Temperature deg F

Leaving Water Temp deg F

Gallons Per Minute (GPM)

Epoxy Coil Coating

YesNo

Optional Secondary Hydronic Heating Coil:

Optional Steam Coil:

(Maximum Operating Steam Pressure is 6 PSI)

Rooftop Applications:

About Us

Keith Willing

Founder and President of Southern Air Concepts since 1998

OUR TEAM

John Hicks

Renato Lemos

Tyler Rood

Luiz Silva

Ron Norman

BRANDS

Founder and President of
Southern Air Concepts since 1998